Hot Melt Opp ROPP Sticker Labeling Machines For Bottles , Label Applicator Equipment
Position on the round bottle and square bottle to paste OPP, BOPP and paper labels which are rolling without glue. This machine will deliver labels automatically, select and cut labels, glue at both ends of each label, add labels and smooth out labels.
The machine suits for the application of mineral water, beverage, food, washing and other industries to realize labels-cutting, glues-coating and labelling for round bottles and square bottle.
Main rotary shaft
The main rotary shaft is comprised of the pressure head rotary plate and the container rotary platform, which is applicable for pressing bottles tightly after their positioning in the vertical direction, and drives bottles to do revolution and rotation for labeling. The bracket coverplate on the container rotary platform is required to change in accordance with a different bottle size. When change the bracket coverplate, loosen the four screws of the bracket coverplate. For bottles with different diameters, please change the pressure head.
The pressure head rotary plate is required to adjust properly in accordance with a different bottle height. Open the left cabinet door, adjust <the pressure head rotary plate vertical location adjusting handle wheel> in Figure 7 to allow adjusting the height of the pressure head rotary plate. Rotate the handle wheel in the clockwise direction and the pressure head rotary plate down; vice versa, the pressure head rotary plate up.
1.3.7. Label station adjusting
The Label station adjusting is applicable for adjusting label location and stability of labeling!
Adjusting of labeling height: release <the Label station vertical adjusting locking screw>, rotate < the Label station vertical adjusting locking screw > to allow adjusting Label station height, to allow adjusting labeling height! Rotate in the clockwise direction, label position up; vice versa, label position down.
Label station adjusting in the right-and-left and anteroposterior direction: release the locking handle screw in the relevant adjusting direction, rotate the adjusting handle wheel in the relevant direction to allow adjusting in the right-and-left or anteroposterior direction! The combination of both directions can set the labeled bottle, the main shaft, the label drum and the glue strip at front and above of the label drum in a single straight line. While that, adjust the anteroposterior adjusting handle wheel to forward 1mm after the glue strip presses a bottle, to ensure each label can stick on a bottle rightly. After finish adjusting, relock the locking screw in the corresponding direction.
|Maximum label output speed||60m/min|
|Maximum speed||30,000 (determined by bottle size and label length)|
|Specifications for labeling bottle||Round bottle and square bottle|
|Power supply||Three phase 380V 50/60Hz|
|Air pressure||5 Kg f/cm2|
|Outside measurement (LxWxH)||About 3000mm(L)×2000mm(W)×2000 mm(H)|
|Total weight||About 2500Kg|
|Capacity:||5,000~30,000BPH||Bottle:||Round & Square|
|Label Material:||OPP, ROPP||Guarantee:||2 Years|
|Service:||Engineers Come To Client Factory For Machine Installation|