|Place of Origin:||China|
|Minimum Order Quantity:||1 pcs|
|Packaging Details:||Standard export wooden case|
|Delivery Time:||30 days|
|Payment Terms:||L/C, T/T|
|Supply Ability:||100 pcs per year|
|Operation:||Automatic / Manual||Voltage:||220v/380v|
|Power:||As Per Plant Module||Function:||Water Purification Plant,micron Membrane Filter,beverage Or Food Company,Remove Impurities|
|Warranty:||12 Months||After-sales Service:||Engineer Oversea Working Available|
Industrial Commercial Underground Tap Water Reverse Osmosis System RO Drinking Pure Mineral Water Filter Purification
UF system is widely used in processing of mineral water, which features easy operation, less labor force and low running cost.
Composition of Water Treatment System:
Pre-treatment system is composed of mechanical filter, active carbon filter, Ion Exchanger and precision filter. The water temperature requires 25±30C.
Flocculator is used for destroying electro-neutral of colloid in water, which ensures raw water can reach to the requirement ofSilt Density Index (SDI) ≤ 4. Mechanical filter can remove most of suspension, colloid and grain impurity, which can ensure initial purification of water.
If some of raw water comes from tap water, chlorine content maybe is higher. Low-pressure compound RO membrane has strict limitation to chlorine and organism, which must be ≤0.1mg/1.
Because calcium and magnesium content in raw water is very high, and RO salt-removing rate is about 97%, which may cause deposit of calcium carbonate, magnesium carbonate, bitter salt, etc. on concentrated water side. Deposit adhered on RO membrane surface and may block passage of components and causes pressure difference increase, water output decrease and salt-removing rate decrease, which influence normal running and usage span of RO. So before precision filter, Ion Exchanger is equipped to protect and avoids impurity on RO concentrated water side.
RO system is composed of high-pressure pump, RO system and chemical cleaning device.
During running, RO membrane may form some deposit and chemical cleaning device is equipped for periodical cleaning to ensure stable running of RO system. This system configures with membrane compounds and high-pressure pump.
High-pressure pump is the power source of RO system. To RO system on sound running condition, high-pressure pump equips inlet/outlet pressure switch. When inlet pressure is less than set value (water lack P≤0.05Mpa) or outlet pressure is higher than set value, pressure switch send signal to PLC programming system and high-pressure pump and RO system will stop in avoidance of destroying to RO membrane because of water pressure.
RO system pressure control and automatic cleaning are controlled by PLC. RO system can wash surface of RO membrane by low-pressure timely and periodically.
2,Main Compoents And Function Description
1). Raw water pump-- provide the pressure to quartz sand filter/active carbon filter
2). Quartz filter-- get rid of turbidity, suspended matter, organic matter, colloid, etc.
3). Active Carbon filter--Remove the color, free chloride, organic matter, harmful matter, etc.
4). Water Softener--using ion exchange resin to exchange "ions" of calcium and magnesium is the most common and the easiest method of removing hardness of water and render the water suitable for utility purpose
5). Security filter--It is also called cartridge Filter, prevent any deposition of large Particles, most of the bacteria, and viruses into the UF membrane and RO membrane, The accuracy is 5um, for holding back any large particulates such as large iron, dust, suspended matter, impurity.
6). High pressure pump-- The high pressure pump is used for make sure there are enough water for satisfying designed production capacity.
7). RO (reverse osmosis) system--RO system is the main part of pure water treatment plant. The RO membrane's desalt rate can reach as high as 99%, it is capable of removing over 99% of ions, bacteria, particles and 98% of organic
Reverse Osmosis Diagram
1).System can produce water continuously, PLC program controlled, Simple in installation and operation
2). RO system be chosen the import USA DOW membrane
3). Tank level control, automatic stop when the raw water tank without water or pure water tank is full
4). RO system flushes RO membranes when it starts to work so that membrane fouling is reduced.
5).CNP high pressure pumps or Denmark Grundofos high pressure pumps are adopted.
6). Product water quality is continuously monitored by conductivity meter.
4.The feature of Reverse Osmosis system water filter
1). Can production water continuously and highly automatic
2). No need the chemical regeneration, easy operation
3). RO system choose the import USA DOW membrane
4). Automatic switch on when low water level, and switch off when high water level
5). RO membrane can backwash automatic and reduce thepollution.
6). Water shortage protection for multi-stage pump
7). Porduction water condutivity meter can test the monitoring quality on line contionuosly.
8). Low operation Cost and Long life span
9). It is PC program controller
10). Easily control and Maintained.
11). Auto membrane flushing
12). Environmental protection, Low power consumption
13) Auto flush/backwash
|A. After-sale service||I. Sunswell offers you high quality machines with 1 year guarantee and supply life-long technical support|
|II. Sunswell provides recommended spare parts.|
|III. Sunswell provides the instruation book for the machines operation and maintenace troubleshooting. And normally, the language of instruction book is Engligh.|
|B. Installation||I. Before machines are delivered into your factory, your esteemed company need to prepare the water, electricity, etc...When machines reached at your factory, engineers from Sunswell will go to your factory within two week, to finish the machines installation and train your staffs.|
|C. Sample service||I. For the machines operation & maintenace troubleshooting, you completely don't worry about that. When all machines have been manufacturered, Sunswell will take the video about machines operating, then show that to you.|
|II. You are welcome to come to visit Sunswell factory, and see the machine running.|
|III. If we get the permission of the customers who have bought the machines from us, we can provide you their contact information and you can go and visit.|
|D. Payment term||30% T/T in advance as deposit, and the balance be cleared before shipment|
Contact Person: Sam Sun