Features: i. This machine has speed regulating motor so that the production capacity can be adjusted according to customer requirement easily. ii. Fixed structure, impeccable controlling system and easily for operating and maintain. iii. All our filling accessory have been well polished, and have nice appearance , fast filling speed, without any leakage; iv. When change the bottles, only need to change the starwheel and guide plate, no other machine accessory need to change.
We can totally produce according to your requirement!
Main features 1. Bottle infeed
The rotary wheel is a fully SUS304 stainless steel welded structure.
The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS304 stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine frame via gear transmission.
Rotary wheel fully made of stainless steel SUS 304.
Gravity filling method.
Filling valves are made of SUS304.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.
Level of cylinder is controlled with float-ball.
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.
Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism which have a photocell switch to stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of caps.
Touch screen: Mitsubishi, Thinget or Weinview PLC program controller: Mitsubishi or Omron Inverter: Mitsubishi or Omron Photoelectrical controller: AUTONICS Other electrical components: Schneider Pneumatic component: Airtac Pump: Nanfang